| SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 170.00 MEGAHERTZ BLANK AND 230.00 MEGAHERTZ BLANK AND 280.00 MEGAHERTZ BLANK AND 340.00 MEGAHERTZ BLANK |
| AVERAGE POWER RATING PER FUNCTION | 0.1 WATTS BLANK |
| BODY LENGTH | 3.970 INCHES MINIMUM AND 4.030 INCHES MAXIMUM |
| BODY WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 40.0 MINIMUM BLANK AND 1.0 MAXIMUM BLANK 1ST FUNCTION |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 4.370 INCHES MINIMUM AND 4.390 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM |
| FEATURES PROVIDED | MOISTURE RESISTANT |
| FREQUENCY BAND WIDTH PER FUNCTION | 230.00 MEGAHERTZ BLANK AND 280.00 MEGAHERTZ BLANK |
| INCLOSURE TYPE | ENCASED |
| INPUT TERMINAL IDENTIFICATION | SMA-RECEPTACLE |
| INPUT TERMINAL MANUFACTURER CODE | 49956 |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 0.8 BLANK |
| LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK |
| OUTPUT TERMINAL IDENTIFICATION | SMA-RECEPTACLE |
| OUTPUT TERMINAL MANUFACTURER CODE | 49956 |
| OVERALL HEIGHT | 1.030 INCHES MAXIMUM |
| OVERALL LENGTH | 4.670 INCHES MINIMUM AND 4.730 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| OPERATING TEMP RANGE | +0.0 TO 70.0 CELSIUS |
| PRINCIPAL CIRCUITRY TYPE PER FUNCTION | INDUCTANCE-CAPACITANCE BLANK |
| REFERENCE FREQUENCY PER FUNCTION | 255.0 MEGAHERTZ BLANK |
| VOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION | 230.0 MEGAHERTZ BLANK AND 280.0 MEGAHERTZ BLANK |
| VOLTAGE STANDING WAVE RATIO PER FUNCTION | 1.5 BLANK |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| TEST DATA DOCUMENT | 49956-929011 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.025 INCHES NOMINAL |
| VIBRATION RESISTANCE RANGE IN HERTZ | +100.0 TO 500.0 |