|
|
|
National Stock Number:
5310-00-011-4618
Federal Supply Class:
5310
National Item Identification Number:
000114618
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 0910979 | 92392 | ALLIS-CHALMERS CORP | | 0910979-4 | 92392 | ALLIS-CHALMERS CORP | | 114618 | 24617 | GENERAL MOTORS CORP | | 21633 | 64104 | DRESSER, LLC | | 114618 | 7X677 | GENERAL MOTORS LLC | | 910979 | 92392 | ALLIS-CHALMERS CORP | | BEAX4G | 00000 | ORDNANCE CORPS | | MILW6986TYPEC | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM | | HOLE DIAMETER | 0.383 INCHES MINIMUM AND 0.398 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | | | MATERIAL THICKNESS | 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM | | MATERIAL | | | NONDEFINITIVE SPEC/STD DATA | C TYPE | | OUTSIDE DIAMETER | 0.765 INCHES NOMINAL | | STYLE DESIGNATOR | COUNTERSINK EXTERNAL TEETH |
|