|
|
|
National Stock Number:
5310-00-011-4617
Federal Supply Class:
5310
National Item Identification Number:
000114617
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 114617 | 12204 | DAIMLER CHRYSLER | | 114617 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 114617 | 24617 | GENERAL MOTORS CORP | | 1518 | 78189 | ITW SHAKEPROOF AUTOMOTIVE PRODUCTS | | 114617 | 7X677 | GENERAL MOTORS LLC | | 138608 | 81996 | U S ARMY AVIATION AND MISSILE COMMAND | | H10366-51 | 15434 | CUMMINS INC. | | S647 | 15434 | CUMMINS INC. | | 1829P536 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | 1829P536 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC | | MILW6986TYPEC | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.318 INCHES MINIMUM AND 0.333 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | | | MATERIAL THICKNESS | 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM | | MATERIAL | | | NONDEFINITIVE SPEC/STD DATA | C TYPE | | OUTSIDE DIAMETER | 0.599 INCHES NOMINAL | | STYLE DESIGNATOR | COUNTERSINK EXTERNAL TEETH |
|