|
|
|
National Stock Number:
3040-01-237-6291
Federal Supply Class:
3040
National Item Identification Number:
012376291
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 77832-60X13 | 96169 | ELECTRIC BOAT CORPORATION | | 77832-60X13 PIE | 96916 | FLEET READINESS CENTER EAST DIV DEPARTMENT OF NAVY | | 77832-60X13 PIECE 1 | 96169 | ELECTRIC BOAT CORPORATION | | SSN637-709-2439604 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | SSN637-709-2439604 PIECE 1 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | IDENTICAL | | FIRST END DIAMETER | 0.6850 INCHES NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 0.8725 INCHES NOMINAL | | OVERALL LENGTH | 20.6875 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281,CLASS CD FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | NICKEL ALLOY | | SPECIAL FEATURES | SPLINES BOTH END LOCATED 0.7812 IN. FROM ENDS;10 SPLINES,0.8725 IN. MAJOR DIA,0.7445 IN. MINOR DIA,1.5625 IN. LG FIRST END,4.000 IN. LG SECOND END | | STEP QUANTITY | 3 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|