|
|
|
National Stock Number:
3040-01-237-6290
Federal Supply Class:
3040
National Item Identification Number:
012376290
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 77832-60X9 | 96169 | ELECTRIC BOAT CORPORATION | | 77832-60X9 PIECE 4 | 96169 | ELECTRIC BOAT CORPORATION | | SSN637-701-2159985 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | SSN637-701-2159985 PIECE 4 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.3782 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 10 | | FIRST END STYLE | SPLINED (STRAIGHT) | | FIRST END SPLINE LENGTH | 1.000 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 1.3720 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 1.1745 INCHES NOMINAL | | LARGEST STEP DIAMETER | 1.750 INCHES NOMINAL | | OVERALL LENGTH | 6.840 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4140 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4140 | | SECOND END DIAMETER | 1.3782 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 1.1745 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 10 | | SECOND END STYLE | SPLINED (STRAIGHT) | | SECOND END SPLINE LENGTH | 1.188 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.3720 INCHES NOMINAL | | SPECIAL FEATURES | DRILLED HOLE 2ND END 0.500 IN. DIA,13UNC-2B,1.250 IN. DEEP | | STEP QUANTITY | 3 | | SURFACE FINISH | 32.0 MICROINCHES |
|
|