9540-01-085-6802, BEAM,STRUCTURAL

National Stock Number:
9540-01-085-6802

Federal Supply Class:
9540

National Item Identification Number:
010856802

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

72385	01634	ALUMINUM CO OF AMERICA
AMS-QQ-A-200/3	0U583	SAE INTERNATIONAL
PA13908	06012	TRANSTAR METALS CORP
AMS-QQ-A-200/3	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
K41A17T3511	81755	LOCKHEED MARTIN CORPORATION
MS14375E143	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
QQ-A-200/3	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	T SHAPET SHAPE
FABRICATION METHOD	EXTRUDEDEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.094 INCHES NOMINAL0.094 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.094 INCHES NOMINAL0.094 INCHES NOMINAL
FIRST TIP STYLE	SQUARE ENDSQUARE END
HEAT TREATMENT	T-3511 SOLUTION HEAT TREATEDT-3511 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	0.869 INCHES NOMINAL0.869 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS	0.120 INCHES NOMINAL0.120 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL
LEG THICKNESS	0.062 INCHES NOMINAL0.062 INCHES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM12.000 FEET MAXIMUM
OVERALL HEIGHT	2.500 INCHES NOMINAL2.500 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSEAMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 2024ALUMINUM ALLOY 2024
NONDEFINITIVE SPEC/STD DATA	T3511 TEMPERT3511 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.281 INCHES NOMINAL1.281 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.120 INCHES NOMINAL0.120 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICALIDENTICAL
TOP FLANGE WIDTH	2.150 INCHES NOMINAL2.150 INCHES NOMINAL
WEIGHT PER UNIT MEASURE	0.488 POUNDS PER LINEAR FOOT0.488 POUNDS PER LINEAR FOOT
SPECIFICATION/STANDARD DATA	81755-K41 MANUFACTURERS STANDARD81755-K41 MANUFACTURERS STANDARD
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIPIDENTICAL W/FIRST TIP

Click here to Register for Free 30-day Trial