9520-01-240-1951, BEAM,STRUCTURAL

5340-01-240-1950 CLAMP,LOOP

4320-01-240-1953 PUMP,ROTARY

National Stock Number:
9520-01-240-1951

Federal Supply Class:
9520

National Item Identification Number:
012401951

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

ABS RULES	0T3K3	AMERICAN BUREAU OF SHIPPING
MIL-S-22698	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILS22698 10.5H X5.75W X 30LBS	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILS22698 GR-AH 36	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH

Techincal Specification:

BASIC SHAPE STYLE	I SHAPE
BOTTOM FLANGE WIDTH	5.750 INCHES NOMINAL
FABRICATION METHOD	HOT ROLLED
FIRST TIP STYLE	SQUARE END
FOURTH TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	2.875 INCHES NOMINAL
LEFT SIDE BOTTOM FLANGE THICKNESS	0.500 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	2.875 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS	0.500 INCHES NOMINAL
LEFT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ABS RULES, GRADE AH36 ASSN STD SINGLE MATERIAL RESPONSE
OVERALL HEIGHT	10.500 INCHES NOMINAL
MATERIAL	STEEL
NONDEFINITIVE SPEC/STD DATA	AH36 GRADE
RIGHT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES	2.875 INCHES NOMINAL
RIGHT SIDE BOTTOM FLANGE THICKNESS	0.500 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	2.875 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.500 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
WEB FLANGE THICKNESS	0.3125 INCHES NOMINAL
WEIGHT PER UNIT MEASURE	30.000 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	IDENTICAL W/FIRST TIP
TOP FLANGE WIDTH	5.750 INCHES NOMINAL

Click here to Register for Free 30-day Trial