9390-01-082-9099, NONMETALLIC CHANNEL

9150-01-082-9100 GREASE,LUBRICATING,FOOD PROCESSI

National Stock Number:
9390-01-082-9099

Federal Supply Class:
9390

National Item Identification Number:
010829099

Description:
NONMETALLIC CHANNEL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM NONMETALLIC MATERIAL(S) HAVING TWO VERTICAL FLANGES THAT EXTEND IN THE SAME DIRECTION FROM EACH END OF A HORIZONTAL BASE. THE VERTICAL FLANGES MAY HAVE VARIOUS TYPE TIPS AND ADDITIONAL FLANGES WHICH EXTEND ON THE SAME PLANE AS THE BASE. IT MAY HAVE A REINFORCING AGENT(S) AND BACKING EXCLUDES SEAL, NONMETALLIC CHANNEL.

Manufacturer Information:

MIL-R-3065	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
X-1142-27068	70485	ATLANTIC INDIA RUBBER CO INC

Techincal Specification:

BASE FLANGE THICKNESS	0.031 INCHES NOMINAL0.031 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE	OPEN CHANNELOPEN CHANNEL
ENVIRONMENTAL PROTECTION	ABRASION RESISTANT AND ABRASION RESISTANT AND ACID RESISTANT AND ACID RESISTANT AND LOW TEMPERATURE AND LOW TEMPERATURE AND HIGH TEMPERATURE AND HIGH TEMPERATURE AND MOISTURE RESISTANTMOISTURE RESISTANT
LEFT SIDE FLANGE THICKNESS	0.031 INCHES NOMINAL0.031 INCHES NOMINAL
LEFT SIDE FLANGE TOP OUTER RADIUS	0.031 INCHES NOMINAL0.031 INCHES NOMINAL
LEFT-SIDE FLANGE TIP STYLE	LEFT W/ OUTSIDE RADIUSLEFT W/ OUTSIDE RADIUS
OUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE	0.031 INCHES NOMINAL0.031 INCHES NOMINAL
OUTER RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE	0.031 INCHES NOMINAL0.031 INCHES NOMINAL
OVERALL HEIGHT	0.156 INCHES NOMINAL0.156 INCHES NOMINAL
OVERALL WIDTH	0.109 INCHES NOMINAL0.109 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-STD-417 MIL STD SINGLE MATERIAL RESPONSEMIL-STD-417 MIL STD SINGLE MATERIAL RESPONSE
MATERIAL	RUBBERRUBBER
MINIMUM TENSILE STRENGTH	1500 POUNDS PER SQUARE INCH (PSI)1500 POUNDS PER SQUARE INCH (PSI)
NONMETALLIC HARDNESS RATING	65.0 MINIMUM SHORE DUROMETER A AND 65.0 MINIMUM SHORE DUROMETER A AND 75.0 MAXIMUM SHORE DUROMETER A75.0 MAXIMUM SHORE DUROMETER A
RIGHT SIDE FLANGE HEIGHT	0.125 INCHES NOMINAL0.125 INCHES NOMINAL
RIGHT SIDE FLANGE THICKNESS	0.031 INCHES NOMINAL0.031 INCHES NOMINAL
RIGHT SIDE FLANGE TOP OUTER RADIUS	0.031 INCHES NOMINAL0.031 INCHES NOMINAL
RIGHT-SIDE FLANGE TIP STYLE	RIGHT W/ OUTSIDE RADIUSRIGHT W/ OUTSIDE RADIUS
SPECIAL FEATURES	COLOR,BLACKCOLOR,BLACK

Click here to Register for Free 30-day Trial