|
|
|
National Stock Number:
5999-01-411-8291
Federal Supply Class:
5999
National Item Identification Number:
014118291
Description:
DELAY LINE
Detail:
AN ITEM WHICH PROVIDES A PREDETERMINED DELAY TO AN ELECTRICAL PULSE, WHILE MAINTAINING SUBSTANTIALLY THE SAME WAVEFORM. THE DELAY IS OBTAINED BY MEANS OF A REAL OR ARTIFICIAL TRANSMISSION LINE OR EQUIVALENT DEVICE. THE EQUIVALENT DEVICE MAY BE ACOUSTIC, DISTRIBUTIVE, LUMPED CONSTANT, MAGNETIC SOLID STATE, OR SURFACE ACOUSTICAL WAVE TYPE. SEE ALSO ATTENUATOR, (AS MODIFIED); TRANSFORMER, (AS MODIFIED); AND OSCILLATOR, PULSE DELAY.
|
Manufacturer Information:
| 00T207 | 20933 | KAPPA TECHNOLOGIES INC. | | 4508-04 | 50965 | PRINCETON ADVANCED COMPONENT | | 9T40S | 00222 | ESC CONTROL ELECTRONICS LLC DBA CONTROL ELECTRONICS DIVISION OF FIL-COIL | | 85008 | 037Z3 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS) | | 85008-04 | 037Z3 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS) | | 85008-04 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | DSP008-04 | 16714 | RHOMBUS INDUSTRIES INC. | | DDU6-8512-4 | 22519 | DATA DELAY DEVICES | | L-13-907 | 62694 | JBM ELECTRONICS INC |
|
Techincal Specification:
| SIGNAL DELAY METHOD | LUMPED CONSTANT | | DELAY TIME VARIATION METHOD | TAPPED | | INDIVIDUAL SECTION QUANTITY | 1 | | SECTION DELAY TIME | 40.000 NANOSECONDS NOMINAL SINGLE SECTION | | SEGMENT QUANTITY PER SECTION | 5 SINGLE SECTION | | SEGMENT DELAY TIME | 8.000 NANOSECONDS NOMINAL SINGLE SECTION ALL SEGMENTS | | OPERATING TEMP RANGE | -55.0 TO 125.0 DEG CELSIUS | | INPUT IMPEDANCE RATING | 500.000 OHMS | | OUTPUT IMPEDANCE RATING | 500.000 OHMS | | VOLTAGE RATING | 4.500 VOLTS NOMINAL | | PULSE RISE TIME RATING | 4.0 NANOSECONDS | | BODY STYLE | RECTANGULAR | | BODY LENGTH | 0.810 INCHES MAXIMUM | | BODY WIDTH | 0.510 INCHES MAXIMUM | | BODY DEPTH | 0.195 INCHES MAXIMUM | | MATERIAL AND LOCATION | PLASTIC, EPOXY CASE OR | | PLASTIC CASE | | TERMINAL TYPE AND QUANTITY | 14 WIRE LEADS | | MOUNTING FACILITY | TERMINAL | | MOUNTING FACILITY QUANTITY | 14 |
|
|