5999-00-826-8451, DELAY LINE

5985-00-826-8450 ISOLATOR,RADIO FREQUENCY REFLECT

5910-00-826-8457 CAPACITOR,FIXED,MICA DIELECTRIC

National Stock Number:
5999-00-826-8451

Federal Supply Class:
5999

National Item Identification Number:
008268451

Description:
DELAY LINE

Detail:
AN ITEM WHICH PROVIDES A PREDETERMINED DELAY TO AN ELECTRICAL PULSE, WHILE MAINTAINING SUBSTANTIALLY THE SAME WAVEFORM. THE DELAY IS OBTAINED BY MEANS OF A REAL OR ARTIFICIAL TRANSMISSION LINE OR EQUIVALENT DEVICE. THE EQUIVALENT DEVICE MAY BE ACOUSTIC, DISTRIBUTIVE, LUMPED CONSTANT, MAGNETIC SOLID STATE, OR SURFACE ACOUSTICAL WAVE TYPE. SEE ALSO ATTENUATOR, (AS MODIFIED); TRANSFORMER, (AS MODIFIED); AND OSCILLATOR, PULSE DELAY.

Manufacturer Information:

128C638H01	03947	MICRO NETWORKS CORPORATION
128C638H01	20933	KAPPA TECHNOLOGIES INC.
128C638H01	48306	NORTHROP GRUMMAN SUPPORT SERVICES CORP
25036	95924	NEUROTECH CORP CONTROL ELECTRONICS DIV
128C638H01	97942	NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

SIGNAL DELAY METHOD	LUMPED CONSTANT
DELAY TIME VARIATION METHOD	TAPPED
INDIVIDUAL SECTION QUANTITY	1
SECTION DELAY TIME	5.000 MICROSECONDS NOMINAL SINGLE SECTION
SEGMENT QUANTITY PER SECTION	10 SINGLE SECTION
SEGMENT DELAY TIME	3.000 MICROSECONDS NOMINAL SINGLE SECTION 1ST SEGMENT
	3.200 MICROSECONDS NOMINAL SINGLE SECTION 2ND SEGMENT
	3.400 MICROSECONDS NOMINAL SINGLE SECTION 3RD SEGMENT
	3.600 MICROSECONDS NOMINAL SINGLE SECTION 4TH SEGMENT
	3.800 MICROSECONDS NOMINAL SINGLE SECTION 5TH SEGMENT
	4.000 MICROSECONDS NOMINAL SINGLE SECTION 6TH SEGMENT
	4.200 MICROSECONDS NOMINAL SINGLE SECTION 7TH SEGMENT
	4.400 MICROSECONDS NOMINAL SINGLE SECTION 8TH SEGMENT
	4.600 MICROSECONDS NOMINAL SINGLE SECTION 9TH SEGMENT
	4.800 MICROSECONDS NOMINAL SINGLE SECTION 10TH SEGMENT
INPUT IMPEDANCE RATING	500.000 OHMS
OUTPUT IMPEDANCE RATING	500.000 OHMS
ATTENUATION IN DECIBELS	3.000
PULSE RISE TIME RATING	143.0 MILLISECONDS
BODY STYLE	RECTANGULAR
BODY LENGTH	3.980 INCHES MINIMUM AND
	4.020 INCHES MAXIMUM
BODY WIDTH	2.980 INCHES MINIMUM AND
	3.020 INCHES MAXIMUM
BODY DEPTH	0.480 INCHES MINIMUM AND
	0.520 INCHES MAXIMUM
MATERIAL AND LOCATION	STEEL, CORROSION RESISTING CASE AND
	BRASS TERMINAL
SURFACE TREATMENT AND LOCATION	ENAMEL, MIL-E-15090 CASE AND
	TINNED TERMINAL
TERMINAL TYPE AND QUANTITY	14 WIRE LEADS
MOUNTING FACILITY	UNTHREADED HOLE
MOUNTING FACILITY QUANTITY	4
HOLE DIAMETER	0.170 INCHES NOMINAL
MOUNTING PROVISION ARRANGEMENT STYLE	FOUR POSITION RECTANGULAR
LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS	2.600 INCHES NOMINAL
LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS	2.400 INCHES NOMINAL

Click here to Register for Free 30-day Trial