5990-00-644-3362, RESOLVER,ELECTRICAL

5977-00-644-3360 BRUSH,ELECTRICAL CONTACT

National Stock Number:
5990-00-644-3362

Federal Supply Class:
5990

National Item Identification Number:
006443362

Description:
RESOLVER,ELECTRICAL

Detail:
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also SYNCHRO (as modified) and GONIOMETER, ELECTRICAL. Excludes TRANSOLVER, ELECTRICAL and potentiometer sine/cosine electrical resolvers.

Manufacturer Information:

23R32N4	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
23RS4C	95542	NORTHROP GRUMMAN SYSTEMS CORPORATION
9144188	18876	U S ARMY AVIATION AND MISSILE COMMAND
7659446	19200	US ARMY ARDEC RDECOM
G231365	70408	AT AND T CORP
MIL-R-14346	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS51079-3	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

AFT OF FIRST FLANGE DIAMETER	1.9940 INCHES MINIMUM AND 1.9950 INCHES MAXIMUM
ALIGNMENT HOLE QUANTITY	4
BODY DIAMETER	1.9840 INCHES NOMINAL
BODY SIZE	23
BODY STYLE	STANDARD ROUND D
FLANGE DIAMETER	2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM
FLANGE THICKNESS	0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
FREQUENCY IN HERTZ	400.0 NOMINAL
LENGTH	0.1680 INCHES MINIMUM AND 0.1700 INCHES MAXIMUM SHOULDER
OVERALL LENGTH	4.7430 INCHES MINIMUM AND 4.7990 INCHES MAXIMUM
MATERIAL	ALUMINUM ALLOY BODY
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT	20.00 OUTPUT
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT	30.00
MOUNTING SURFACE TO TERMINAL END DISTANCE	4.0240 INCHES MINIMUM AND 4.0800 INCHES MAXIMUM
SHAFT LENGTH	0.6930 INCHES MINIMUM AND 0.7190 INCHES MAXIMUM SINGLE SHAFT
SHAFT NOMINAL THREAD SIZE	0.250 INCHES SINGLE SHAFT
SHAFT THREAD CLASS	3A SINGLE SHAFT
SHAFT THREAD DIRECTION	RIGHT-HAND SINGLE SHAFT
SHAFT THREAD LENGTH	0.2800 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM SINGLE SHAFT
SHAFT THREAD SERIES DESIGNATOR	UNF SINGLE SHAFT
SHAFT TYPE	ROUND, THREADED SINGLE SHAFT
SHOULDER DIAMETER	1.9850 INCHES MINIMUM AND 1.9950 INCHES MAXIMUM
PILOT DIAMETER	0.5900 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM
PILOT LENGTH	0.0310 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM
PHASE SHIFT ANGLE IN DEG	0.900 INPUT TO OUTPUT NOMINAL
SECOND SHOULDER DIAMETER	1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM
SECOND SHOULDER LENGTH	0.1680 INCHES MINIMUM AND 0.1700 INCHES MAXIMUM
SHAFT DIAMETER	0.2402 INCHES MINIMUM AND 0.2405 INCHES MAXIMUM SINGLE SHAFT
TRANSFORMATION RATIO	1.000 ROTOR TO STATOR NOMINAL
STATOR INPUT CURRENT RATING	23.0 MILLIAMPERES NOMINAL
STATOR INPUT ELECTRICAL POWER RATING	100.0 MILLIWATTS NOMINAL
STATOR INPUT VOLTAGE RATING IN VOLTS	90.0 NOMINAL
TERMINAL LOCATION	REAR
TERMINAL TYPE AND QUANTITY	8 SCREW
TEST DATA DOCUMENT	18876-9144188 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

Click here to Register for Free 30-day Trial