5985-01-240-4304, ATTENUATOR,VARIABLE

5970-01-240-4305 INSULATION SLEEVING,ELECTRICAL

National Stock Number:
5985-01-240-4304

Federal Supply Class:
5985

National Item Identification Number:
012404304

Description:
ATTENUATOR,VARIABLE

Detail:
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Manufacturer Information:

100D0712

28983

DAICO INDUSTRIES, INC.

Techincal Specification:

ADJUSTMENT DEVICE TYPE AND QUANTITY	7 SOLENOID
APPLICATION DESIGN	TRANSMISSION LINE
ATTENUATION VARIATION METHOD	STEPPED
BODY STYLE	COAXIAL TYPE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	5.375 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	1.250 INCHES NOMINAL
COAXIAL CONNECTOR SERIES DESIGNATION	SMA
FREQUENCY RANGE	0.000 HERTZ MINIMUM AND 400.000 MEGAHERTZ MAXIMUM
IMPEDANCE RATING IN OHMS	50.0 INPUT-OUTPUT
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS	3.5
OVERALL ATTENUATION RANGE IN DECIBELS	+0.0 TO 63.0
OVERALL HEIGHT	0.875 INCHES NOMINAL
OVERALL LENGTH	5.750 INCHES NOMINAL
OVERALL WIDTH	1.750 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY	4 UNTHREADED HOLE
MOUNTING FACILITY PATTERN	FOUR POSITION RECTANGULAR
STEP POSITION QUANTITY	7
VOLTAGE STANDING WAVE RATIO	1.25
TERMINAL TYPE AND QUANTITY	2 CONNECTOR, COAXIAL, FEMALE AND 8 TAB, SOLDER LUG
UNTHREADED MOUNTING HOLE DIAMETER	0.144 INCHES NOMINAL

Click here to Register for Free 30-day Trial