| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| DC RESISTANCE RATING IN OHMS | 1.300 SINGLE COMPONENT SINGLE PRIMARY |
| 0.700 SINGLE COMPONENT SINGLE SECONDARY |
| INDUCTANCE RATING | 0.80 MILLIHENRIES MINIMUM AND |
| 1.20 MILLIHENRIES MAXIMUM SINGLE COMPONENT SINGLE PRIMARY |
| FREQUENCY RATING | 10.0 KILOHERTZ NOMINAL SINGLE COMPONENT |
| PRIMARY TO SECONDARY TURN RATIO | 2 TO 1 SINGLE COMPONENT |
| WINDING FUNCTION AND QUANTITY | 1 PRIMARY AND |
| 1 SECONDARY SINGLE COMPONENT |
| MOUNTING METHOD | TERMINAL SINGLE GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.590 INCHES MINIMUM AND |
| 0.610 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.390 INCHES MINIMUM AND |
| 0.410 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| INCLOSURE TYPE | FULLY INCLOSED |
| BODY LENGTH | 0.780 INCHES MINIMUM AND |
| 0.800 INCHES MAXIMUM |
| BODY HEIGHT | 0.330 INCHES MINIMUM AND |
| 0.350 INCHES MAXIMUM |
| BODY WIDTH | 0.495 INCHES MINIMUM AND |
| 0.505 INCHES MAXIMUM |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 05869-732566-4 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| MAXIMUM OPERATING TEMP | 130.0 DEG CELSIUS |