|
|
|
National Stock Number:
5940-00-177-4414
Federal Supply Class:
5940
National Item Identification Number:
001774414
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 2482009G1 | 28527 | L3HARRIS TECHNOLOGIES, INC. |
|
Techincal Specification:
| BODY STYLE | STRIP TYPE | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | MATERIAL | GLASS FIBER AND | | PLASTIC EPOXY BOARD | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-18177,TYPE GEE MIL SPEC SINGLE MATERIAL RESPONSE BOARD | | BOARD OVERALL LENGTH | 3.000 INCHES | | BOARD OVERALL WIDTH | 1.700 INCHES | | BOARD THICKNESS | 0.062 INCHES | | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW | | TERMINAL ROW QUANTITY | 3 | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.550 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.250 INCHES | | TERMINAL DESIGN | NONFEEDTHRU | | NONFEEDTHRU TERMINAL TYPE | 434 SINGLE | | NONFEEDTHRU TERMINAL QUANTITY | 27 SINGLE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.600 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.300 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.200 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.200 INCHES | | MOUNTING HOLE DIAMETER | 0.145 INCHES | | SPECIAL MARKINGS | R16 THRU R33,TB4,1 THRU 27 | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 28527 | | DESIGN CONTROL REFERENCE | 2482009G1 |
|
|