|
|
|
National Stock Number:
5940-00-171-0421
Federal Supply Class:
5940
National Item Identification Number:
001710421
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 299530-2 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 299530PC2 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | X191881PC2 | 81616 | YORK INDUSTRIES, INC. |
|
Techincal Specification:
| BODY STYLE | BARRIER TYPE | | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | MATERIAL | PLASTIC PHENOL-FORMALDEHYDE BOARD | | BOARD OVERALL LENGTH | 1.938 INCHES | | BOARD OVERALL WIDTH | 1.000 INCHES | | BOARD OVERALL HEIGHT | 0.594 INCHES | | BOARD HEIGHT EXCLUDING TERMINALS | 0.594 INCHES | | BASE THICKNESS | 0.406 INCHES | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW | | TERMINAL ROW QUANTITY | 1 | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.660 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.500 INCHES | | TERMINAL DESIGN | NONFEEDTHRU | | NONFEEDTHRU TERMINAL TYPE | 862 SINGLE | | NONFEEDTHRU TERMINAL QUANTITY | 2 SINGLE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.500 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.500 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.219 INCHES | | MOUNTING HOLE DIAMETER | 0.218 INCHES |
|
|