|
|
|
National Stock Number:
5935-01-557-1656
Federal Supply Class:
5935
National Item Identification Number:
015571656
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| MIL-DTL-22992 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS90555C44513S | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 2.209 INCHES MINIMUM AND 2.230 INCHES MAXIMUM | | BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 2.812 INCHES NOMINAL | | CONTACT MATERIAL | STEEL CORROSION RESISTING SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, CLASS 303 CONDITION A FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.812 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT | | INSERT MATERIAL | PLASTIC SINGLE MATING END | | OVERALL HEIGHT | 3.355 INCHES MINIMUM AND 3.396 INCHES MAXIMUM | | OVERALL LENGTH | 3.939 INCHES MINIMUM AND 4.017 INCHES MAXIMUM | | OVERALL WIDTH | 3.355 INCHES MINIMUM AND 3.396 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SAE-AMS-QQ-N-290 ASSN STD 1ST TREATMENT RESPONSE OR SAE-AMS-C-26074 ASSN STD 1ST TREATMENT RESPONSE AND SAE-AMS-QQ-P-416 ASSN STD 1ST TREATMENT RESPONSE | | SHELL TYPE | SOLID | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | UNTHREADED MOUNTING HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 96906-MS-9055E GOVERNMENT STANDARD | | SUPPLEMENTARY FEATURES | THREAD CLASS 2A 3.000-1428P-2857L | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | TEST DATA DOCUMENT | 81349 MIL-C-22992E SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A | | THREADED DEVICE TYPE | COUPLING FACILITY |
|
|