4730-01-382-8825 STRAINER ELEMENT,SEDIMENT Index 4820-01-382-8827 VALVE,REGULATING,FLUID PRESSURE

National Stock Number:
5935-01-382-8826

Federal Supply Class:
5935

National Item Identification Number:
013828826

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
M81659/29A201400U583SAE INTERNATIONAL
M81659/29A2014081349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SAE-AS81659/290U583SAE INTERNATIONAL
MIL-C-81659/2981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.764 INCHES NOMINAL
BODY STYLESTRAIGHT SHAPE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT1.720 INCHES NOMINAL
CONNECTOR LOCKING METHODFRICTION
CONTACT MATERIALCOPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT POSITION ARRANGEMENT STYLE32C2 SINGLE MATING END
CONTACT REMOVABILITYREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENTGOLD SINGLE MATING END ALL CONTACT GROUPINGS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.427 INCHES MINIMUM AND 1.447 INCHES MAXIMUM
INCLUDED CONTACT TYPECOAXIAL SOCKET SINGLE MATING END FIRST CONTACT GROUPING
INCLUDED CONTACT TYPEROUND SOCKET SINGLE MATING END SECOND CONTACT GROUPING
INCLUDED CONTACT QUANTITY2 SINGLE MATING END FIRST CONTACT GROUPING
INCLUDED CONTACT QUANTITY30 SINGLE MATING END SECOND CONTACT GROUPING
INSERT MATERIALPLASTIC DIALLYL PHTHALATE GLASS FILLED OR PLASTIC EPOXY OR PLASTIC PHENOLIC SINGLE MATING END
OVERALL HEIGHT2.032 INCHES MINIMUM AND 2.062 INCHES MAXIMUM
OVERALL LENGTH2.320 INCHES MAXIMUM
OVERALL WIDTH1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM
MATING END QUANTITY1
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PRECIOUS MATERIAL AND WEIGHT0.032 GOLD GRAINS, TROY
PRECIOUS MATERIALGOLD
SHELL MATERIALALUMINUM ALLOY
SHELL SURFACE TREATMENTCADMIUM AND CHROMATE
SHELL TYPESOLID
SPECIFICATION/STANDARD DATA81349-MIL-C-81659/29 GOVERNMENT SPECIFICATION
UNTHREADED MOUNTING HOLE DIAMETER0.118 INCHES MINIMUM AND 0.122 INCHES MAXIMUM
TERMINAL LOCATIONBACK SINGLE MATING END ALL CONTACT GROUPINGS
TERMINAL TYPECRIMP SINGLE MATING END ALL CONTACT GROUPINGS
TEST DATA DOCUMENT81349-MIL-C-81659 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us