| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 2.845 INCHES MINIMUM AND 2.855 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE |
| CONNECTOR LOCKING METHOD | JACKSCREW-SOCKET |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 5.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 2 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END |
| ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND VIBRATION RESISTANT AND CORROSION RESISTANT AND HUMIDITY RESISTANT AND FUNGUS RESISTANT |
| INCLUDED CONTACT QUANTITY | 54 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE SDG-F OR TYPE GDI-30F MIL SPEC 1ST MATERIAL RESPONSE OR MIL-M-24519,TYPE GPT-30F OR GST-40F MIL SPEC 2ND MATERIAL RESPONSE SINGLE MATING END |
| INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE GLASS FILLED OR PLASTIC POLYESTER GLASS FILLED SINGLE MATING END |
| OPERATING TEMP RATING | -65.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| OVERALL HEIGHT | 0.712 INCHES NOMINAL |
| OVERALL LENGTH | 3.040 INCHES MINIMUM AND 3.060 INCHES MAXIMUM |
| OVERALL WIDTH | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 0.086 INCHES |
| POLARIZATION METHOD | JACKSCREW |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.054 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| SPECIAL FEATURES | JACKSCREW TYPE-MALE AND LOCATION-RIGHT HAND BOTTOMANDJACKSCREW TYPE-FEMALE AND LOCATION-LEFT HAND TOP |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-55302/56 GOVERNMENT SPECIFICATION |
| SUPPLEMENTARY FEATURES | MOUNTING METHOD - PRINTED CIRCUIT TAB AND STUD |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | PRINTED CIRCUIT SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-MIL-C-55302 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A AND 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 56 |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| THREADED DEVICE TYPE | COUPLING FACILITY AND MOUNTING STUD |