5935-01-241-3560, CONNECTOR,RECEPTACLE,ELECTRICAL

5935-01-241-3559 CONNECTOR,PLUG,ELECTRICAL

5935-01-241-3561 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-241-3560

Federal Supply Class:
5935

National Item Identification Number:
012413560

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

M83503/20-05	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-83503/20	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-83503/20	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BODY STYLE	RIGHT ANGLE TYPE
CONTACT POSITION ARRANGEMENT STYLE	2 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END
TERMINAL LOCATION	SIDE SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	PIN SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	FLAT PIN SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY	14 SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY	1
OVERALL LENGTH	1.460 INCHES NOMINAL
OVERALL HEIGHT	1.300 INCHES MAXIMUM
OVERALL WIDTH	0.478 INCHES MAXIMUM
DISTANCE BETWEEN MOUNTING FACILITY CENTERS	1.060 INCHES NOMINAL
UNTHREADED MOUNTING HOLE DIAMETER	0.093 INCHES MINIMUM AND
	0.105 INCHES MAXIMUM
CONNECTOR LOCKING METHOD	FRICTION AND
	LATCH
POLARIZATION METHOD	MATING END
INSERT MATERIAL	PLASTIC POLYESTER AND
	GLASS FIBER SINGLE MATING END
INSERT MATERIAL DOCUMENT AND CLASSIFICATION	MIL-M-24519,TY GPT-15,TY GPT-20 OR GPT-30 MIL SPEC ALL MATERIAL RESPONSES SINGLE MATING END
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS	1.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	300.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL	COPPER ALLOY 260 OR
	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION	CDA260 ASSN STD SINGLE MATERIAL RESPONSE OR
	ASTM-B-122 ASSN STD SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION	CORROSION RESISTANT AND
	FUNGUS RESISTANT AND
	HUMIDITY RESISTANT AND
	SHOCK RESISTANT AND
	VIBRATION PROOF
TEST DATA DOCUMENT	81349-MIL-C-83503 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
PRECIOUS MATERIAL	GOLD
PRECIOUS MATERIAL AND WEIGHT	0.014 GOLD GRAINS, TROY
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
SPECIFICATION/STANDARD DATA	81349-MIL-C-83503/20 GOVERNMENT SPECIFICATION
SPEC/STD CONTROLLING DATA
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	MIL-DTL-83503/20
MANUFACTURERS CODE	81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	M83503/20-05

Click here to Register for Free 30-day Trial