5930-00-177-2760 ARM,SWITCH ACTUATOR Index 5935-00-177-2766 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-00-177-2761

Federal Supply Class:
5935

National Item Identification Number:
001772761

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.


Manufacturer Information:
35077280249BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
70106716733RFS TECHNOLOGIES, INC.
MDC 504-152335DAL-TECH DEVICES, INC.
SM-C-68797380063US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
SMB68797380063US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
70106796341COBHAM ADVANCED ELECTRONIC SOLUTIONS INC.
UG1898TPM24V80058JOINT ELECTRONICS TYPE DESIGNATION SYSTEM


Techincal Specification:
BODY STYLESTRAIGHT SHAPE
OVERALL LENGTH1.170 INCHES MINIMUM AND
1.210 INCHES MAXIMUM
OVERALL DIAMETER0.672 INCHES MINIMUM AND
0.704 INCHES MAXIMUM
BUSHING ACCOMMODATION HOLE SHAPEROUND
CONNECTOR LOCKING METHODBAYONET PIN AND
EXTERNALLY THREADED SHELL
THREADED DEVICE TYPECOUPLING FACILITY AND
MOUNTING BUSHING
THREAD SERIES DESIGNATORUNF AND
UNEF
NOMINAL THREAD SIZE0.190 INCHES AND
0.500 INCHES
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
SHELL TYPESOLID
SHELL MATERIALCOPPER ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE
SHELL SURFACE TREATMENTGOLD
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE
MATING END QUANTITY2
CONTACT POSITION ARRANGEMENT STYLENONSTD 1ST MATING END
BNC 2ND MATING END
INSERT MATERIALPLASTIC TETRAFLUOROETHYLENE ALL MATING ENDS
INCLUDED CONTACT QUANTITY1 1ST MATING END SINGLE CONTACT GROUPING
1 2ND MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITYNONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPECOAXIAL PIN 1ST MATING END SINGLE CONTACT GROUPING
COAXIAL SOCKET 2ND MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS10.0 ALL MATING ENDS SINGLE CONTACT GROUPING
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MATERIALCOPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTIONSHOCK PROOF AND
VIBRATION RESISTANT AND
SALT WATER RESISTANT
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.110 GOLD GRAINS, TROY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACE AND SHELL SURFACE GOLD


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us