|
|
|
National Stock Number:
5935-00-175-5918
Federal Supply Class:
5935
National Item Identification Number:
001755918
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 396779-1 | 00752 | L3HARRIS TECHNOLOGIES, INC. | | 396779-1 | 08718 | ITT CANNON ELECTRIC PHOENIX DIV | | 396779-1 | 94375 | LAX ELECTRONICS, INC. |
|
Techincal Specification:
| BODY STYLE | ANGLE SHAPE, EXTERNAL COUPLING | | CONTACT POSITION ARRANGEMENT STYLE | BNC SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 1.094 INCHES NOMINAL | | BUSHING DIAMETER | 0.312 INCHES MINIMUM AND | | 0.344 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.521 INCHES MINIMUM AND | | 0.541 INCHES MAXIMUM | | OVERALL HEIGHT | 1.125 INCHES MAXIMUM | | OVERALL WIDTH | 0.734 INCHES MINIMUM AND | | 0.766 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.521 INCHES MINIMUM AND | | 0.541 INCHES MAXIMUM | | DISTANCE FROM MOUNTING SHOULDER TO REAR FACE | 0.360 INCHES NOMINAL | | FLANGE LENGTH | 0.734 INCHES MINIMUM AND | | 0.766 INCHES MAXIMUM | | UNTHREADED MOUNTING HOLE DIAMETER | 0.126 INCHES MINIMUM AND | | 0.146 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | BAYONET PIN | | SHELL TYPE | SOLID | | SHELL MATERIAL | COPPER | | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP 22 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE | | SHELL SURFACE TREATMENT | SILVER | | INSERT MATERIAL | PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND | | SALT WATER RESISTANT AND | | VIBRATION RESISTANT | | PRECIOUS MATERIAL | GOLD AND | | SILVER | | PRECIOUS MATERIAL AND WEIGHT | 0.101 GOLD GRAINS, TROY AND | | 0.101 SILVER GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACTSURFACE GOLD AND | | BODY SURFACE SILVER |
|
|