5935-00-168-1348 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5920-00-168-1351 ARRESTER,ELECTRICAL SURGE

National Stock Number:
5935-00-168-1349

Federal Supply Class:
5935

National Item Identification Number:
001681349

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
2515385-153711NAVAL SEA SYSTEMS COMMAND
801608718ITT CANNON ELECTRIC PHOENIX DIV
REB4921280064NAVAL SHIP SYSTEMS COMMAND
UG-593A/U81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
UG593U81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
UG593BU91836WINCHESTER INTERCONNECT CORPORATION


Techincal Specification:
CABLE ENTRANCE DIAMETER0.500 INCHES NOMINAL
SHELL TYPESOLID
SHELL MATERIALCOPPER ALLOY 360
SHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE
SHELL SURFACE TREATMENTSILVER AND
CHROMATE
POLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
INSERT POSITION IN DEG0.0
INSERT MATERIALPLASTIC TETRAFLUOROETHYLENE SINGLE MATING END
CONTACT REMOVABILITYREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIALCOPPER ALLOY 360 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD AND
COPPER SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TYPE II,CLASS 2 MIL SPEC ALL TREATMENT RESPONSES SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTIONSHOCK RESISTANT AND
VIBRATION RESISTANT AND
SALT WATER RESISTANT
PRECIOUS MATERIALGOLD AND
SILVER
PRECIOUS MATERIAL AND WEIGHT0.005 GOLD GRAINS, TROY AND
0.100 SILVER GRAINS, TROY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACE GOLD AND
BODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING
CONTACT POSITION ARRANGEMENT STYLEN SINGLE MATING END
TERMINAL LOCATIONBACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPECOAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY1
OVERALL LENGTH1.400 INCHES NOMINAL
BUSHING DIAMETER0.630 INCHES NOMINAL
OVERALL HEIGHT1.000 INCHES NOMINAL
OVERALL WIDTH1.000 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.720 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.720 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.660 INCHES NOMINAL
UNTHREADED MOUNTING HOLE DIAMETER0.125 INCHES NOMINAL
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
THREADED DEVICE TYPECOUPLING FACILITY
THREAD SERIES DESIGNATORUNEF
NOMINAL THREAD SIZE0.625 INCHES
THREAD CLASS2A
THREAD QUANTITY PER INCH24
THREAD DIRECTIONRIGHT-HAND
CONNECTOR CABLE STRAIN RELIEF METHODCOMPRESSION NUT
SHELL SURFACE SILVER


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us