5935-00-134-5644 CONNECTOR,PLUG,ELECTRICAL Index 5930-00-134-5649 SWITCH,TOGGLE

National Stock Number:
5935-00-134-5646

Federal Supply Class:
5935

National Item Identification Number:
001345646

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.


Manufacturer Information:
MIL-DTL-2743481349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILA2743481349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS90579-137596906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
PRECIOUS MATERIAL AND WEIGHT0.110 SILVER GRAINS, TROY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACE AND SHELL SURFACE SILVER
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMIL-DTL-27434
MANUFACTURERS CODE96906
DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMS90579-1375
BODY STYLESTRAIGHT SHAPE
OVERALL LENGTH2.500 INCHES MAXIMUM
OVERALL DIAMETER1.500 INCHES MINIMUM
BUSHING ACCOMMODATION HOLE SHAPEROUND
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL AND
BAYONET PIN
THREADED DEVICE TYPECOUPLING FACILITY AND
MOUNTING BUSHING
THREAD SERIES DESIGNATORDOUBLE STUB AND
UNEF
NOMINAL THREAD SIZE1.500 INCHES AND
1.125 INCHES
THREAD CLASS2A
THREAD QUANTITY PER INCH4 AND
18
THREAD DIRECTIONRIGHT-HAND
SHELL TYPESOLID
SHELL MATERIALCOPPER ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE
SHELL SURFACE TREATMENTSILVER
MATING END QUANTITY2
CONTACT POSITION ARRANGEMENT STYLENONSTD 1ST MATING END
C 2ND MATING END
INCLUDED CONTACT QUANTITY1 1ST MATING END ALL CONTACT GROUPINGS
1 2ND MATING END ALL CONTACT GROUPINGS
CONTACT REMOVABILITYNONREMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS
INCLUDED CONTACT TYPECOAXIAL SOCKET ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT MATERIALCOPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-530 OR QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENTSILVER ALL MATING ENDS ALL CONTACT GROUPINGS
TEST DATA DOCUMENT81349-MIL-DTL-27434 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIFICATION/STANDARD DATA81349-MIL-DTL-27434 GOVERNMENT SPECIFICATION
PRECIOUS MATERIALSILVER


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us