5930-01-243-9197, SWITCH,CODE INDICATING WHEEL

5930-01-243-9196 SWITCH,CODE INDICATING WHEEL

5930-01-243-9198 SWITCH,CODE INDICATING WHEEL

National Stock Number:
5930-01-243-9197

Federal Supply Class:
5930

National Item Identification Number:
012439197

Description:
SWITCH,CODE INDICATING WHEEL

Detail:
A SWITCH WHICH IS EXTERNALLY ACTUATED BY A THUMBWHEEL AND/OR PUSHBUTTON. A LEGEND OR MESSAGE IS VISUALLY DISPLAYED AT EACH POSITION OF THE INDICATING WHEEL WHICH CORRESPONDS TO ELECTRICALLY CODED OUTPUT. ELECTRICALLY CODED OUTPUT IS ACHIEVED BY ROTATING A SET OF BRUSH CONTACTS PERMANENTLY ATTACHED TO THE CODE INDICATING WHEEL, AGAINST A STATIONARY COMMUTATOR WHICH IS USUALLY A PRINTED WIRING BOARD HAVING ELECTRICAL PADS OR CONTACTS WHICH ARE INTERCONNECTED BY THE ROTATING BRUSH CONTACTS. MAY HAVE ADDITIONAL ELECTRICAL COMPONENTS (SUCH AS RESISTORS, CAPACITORS, DIODES) PREMOUNTED ON THAT PORTION OF PRINTED WIRING BOARD WHICH EXTENDS BEYOND THE BACK OF SWITCH HOUSING.

Manufacturer Information:

07-B-0287	07126	ELECTRO SWITCH CORP.
N7-B-287	07126	ELECTRO SWITCH CORP.

Techincal Specification:

ACTUATOR TYPE	THUMBWHEEL ALL ACTUATORS
CONTACT ARRANGEMENT TRUTH TABLE	BCD, 1 POLE - 10 POSITIONS 2ND SECTION
CONTACT LOAD CURRENT RATING	125.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL
CONTACT LOAD CURRENT RATING	125.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL
CONTACT VOLTAGE RATING IN VOLTS	28.0 AC AT SEA LEVEL
CONTACT VOLTAGE RATING IN VOLTS	28.0 DC AT SEA LEVEL
INDIVIDUAL SECTION QUANTITY	2
MOUNTING FACILITY PATTERN	FOUR POSITION RECTANGULAR SINGLE MOUNTING FACILITY
MOUNTING METHOD	UNTHREADED HOLE SINGLE MOUNTING FACILITY
OVERALL HEIGHT	1.250 INCHES NOMINAL
OVERALL LENGTH	2.260 INCHES NOMINAL
OVERALL WIDTH	1.150 INCHES NOMINAL
READOUT INDICATOR MARKING	0,1 1ST SECTION
READOUT INDICATOR MARKING	0,1,2,3,4,5,6,7,8,9 2ND SECTION
STYLE DESIGNATOR	RECTANGULAR INDICATING
SWITCH ACTUATOR INDEXING POSITION QUANTITY	10 2ND ACTUATOR
SWITCH ACTUATOR INDEXING POSITION QUANTITY	2 1ST ACTUATOR
TERMINAL TYPE	TAB, SOLDER LUG
UNTHREADED MOUNTING HOLE DIAMETER	0.100 INCHES NOMINAL SINGLE MOUNTING FACILITY

Click here to Register for Free 30-day Trial