|
|
|
National Stock Number:
5930-00-015-3542
Federal Supply Class:
5930
National Item Identification Number:
000153542
Description:
SWITCH,THERMOSTATIC
Detail:
A switch that is actuated by changes in ambient temperature. Excludes CIRCUIT BREAKER; CONTROL, TEMPERATURE (as modified); FUSE (as modified); PROTECTOR, THERMAL-OVERLOAD, ELECTRICAL MOTOR; RELAY, THERMAL; and THERMOSTAT, FLOW CONTROL. See also CONTROL, TEMPERATURE (as modified) and REGULATOR, TEMPERATURE (as modified).
|
Manufacturer Information:
| 28NP/N0/212DEGF/S0LDER SEAL | 74389 | ULANET GEORGE CO | | 28NP/NO/212DEGF/SOLDER SEAL | 74389 | ULANET GEORGE CO | | 32411-0-212DEGFP | 73168 | KIDDE TECHNOLOGIES, INC | | 32411-0-212DEGFP0M3D | 73168 | KIDDE TECHNOLOGIES, INC | | 32411-0-212DEGFP0RM3 | 73168 | KIDDE TECHNOLOGIES, INC | | 32411-0-212P0RM3PCT | 73168 | KIDDE TECHNOLOGIES, INC | | VE-3102 CR 212DEGF/FACT0RY SEAL | 93929 | RADIODETECTION, LLC | | VE-3102 CR 212DEGF/FACTORY SEAL | 93929 | RADIODETECTION, LLC |
|
Techincal Specification:
| STYLE DESIGNATOR | RECTANGULAR W/BRACKET | | OVERALL LENGTH | 1.250 INCHES NOMINAL | | OVERALL HEIGHT | 0.406 INCHES NOMINAL | | OVERALL WIDTH | 0.406 INCHES NOMINAL | | BODY LENGTH | 0.776 INCHES NOMINAL | | BODY WIDTH | 0.344 INCHES NOMINAL | | BODY HEIGHT | 0.250 INCHES NOMINAL | | NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION | | CONTACT ACTION STIMULUS | INCREASE | | CONTACT ADJUSTABILITY | DEACTUATION POINT NOT ADJUSTABLE AND | | ACTUATION POINT NOT ADJUSTABLE | | CONTACT STIMULUS RATING | 212.00 ACTUATION POINT NOMINAL DEGREES FAHRENHEIT AND | | 208.00 DEACTUATION POINT NOMINAL DEGREES FAHRENHEIT | | CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL SINGLE VOLTAGE | | FREQUENCY IN HERTZ | 60.0 SINGLE VOLTAGE | | CONTACT LOAD CURRENT RATING | 2.5 AMPERES RESISTIVE LOAD SINGLE VOLTAGE | | MEDIA FOR WHICH DESIGNED | GAS | | TEMP SENSING ELEMENT TYPE | INTERNAL SENSOR | | TERMINAL TYPE | TAB, SOLDER LUG | | MOUNTING METHOD | BRACKET AND | | UNTHREADED HOLE | | UNTHREADED MOUNTING HOLE DIAMETER | 0.140 INCHES NOMINAL | | MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE | | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.000 INCHES NOMINAL | | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF |
|
|