5925-01-242-2690, CIRCUIT BREAKER

National Stock Number:
5925-01-242-2690

Federal Supply Class:
5925

National Item Identification Number:
012422690

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

260-4021-240	13499	ROCKWELL COLLINS, INC.
AM12 HKMG6-7.5-5-250-60	74193	EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV
APL1R-571-240	81541	SENSATA TECHNOLOGIES MARYLAND, INC

Techincal Specification:

POLE QUANTITY	1
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	7.5 AMPERES AC SINGLE LOCATION
CIRCUIT PROTECTION TYPE	OVERCURRENT SINGLE LOCATION
TERMINAL TYPE AND QUANTITY	2 THREADED STUD
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	250.0 AC SINGLE LOCATION
TRIP RELEASE CHARACTERISTIC	TIME DELAY SINGLE LOCATION
RESET METHOD	MANUAL
BODY STYLE	SINGLE POLE TYPE
MOUNTING FACILITY TYPE AND QUANTITY	2 THREADED HOLE
CASE MATERIAL	PLASTIC
TRIP RELEASE METHOD	MAGNETIC SINGLE LOCATION
FREQUENCY IN HERTZ	60.0 SINGLE LOCATION
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC SINGLE LOCATION
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP SINGLE LOCATION
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.250 MINIMUM AT 200 PCT AND
	0.700 MAXIMUM AT 200 PCT SINGLE LOCATION
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	115.0 SINGLE LOCATION
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
BODY LENGTH	2.530 INCHES MAXIMUM
BODY WIDTH	0.755 INCHES MINIMUM AND
	0.770 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.950 INCHES MINIMUM AND
	1.970 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.050 INCHES MINIMUM AND
	2.070 INCHES MAXIMUM
BOSS HEIGHT	0.145 INCHES MINIMUM AND
	0.160 INCHES MAXIMUM
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.900 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNC
NOMINAL THREAD SIZE	0.138 INCHES
THREAD QUANTITY PER INCH	32
THREAD PITCH DIAMETERS	0.1177 TO 0.1214 INCHES
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE ONE
AUXILIARY SWITCH FUNCTION AND QUANTITY	1 ALARM
SWITCH LOCATION AND POSITION DESIGNATION	INTERNAL AT POLE ONE
SWITCH CONTACT ARRANGEMENT	SINGLE POLE, DOUBLE THROW
SWITCH CURRENT RATING AND TYPE IN AMPS	2.5 AC AND
	1.0 DC
SWITCH VOLTAGE RATING AND TYPE IN VOLTS	250.0 AC AND
	50.0 DC
SWITCH TERMINAL TYPE	TAB, SOLDER LUG
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	VIBRATIONPROOF AND
	EXPLOSION PROOF AND
	DUSTPROOF AND
	SAND RESISTANT AND
	HUMIDITY RESISTANT AND
	SALT SPRAY PROOF
TEST DATA DOCUMENT	13499-260-4021 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
ARC QUENCHING METHOD	MAGNETIC BLOWOUT
STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
SPECIAL HANDLING FEATURE	MAGNETIC
FRAGILITY FACTOR	MODERATELY RUGGED

Click here to Register for Free 30-day Trial