5925-01-065-4090, CIRCUIT BREAKER

5910-01-065-4088 CAPACITOR,FIXED,ELECTROLYTIC

National Stock Number:
5925-01-065-4090

Federal Supply Class:
5925

National Item Identification Number:
010654090

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

260-1015-010	13499	ROCKWELL COLLINS, INC.
APL-2783-1	81541	SENSATA TECHNOLOGIES MARYLAND, INC

Techincal Specification:

ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT EACH POLE
BODY LENGTH	2.490 INCHES NOMINAL
BODY STYLE	MULTIPOLE-MULTIPLE ACTUATOR TYPE
BODY WIDTH	4.500 INCHES MAXIMUM
BOSS HEIGHT	0.150 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.928 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.750 INCHES NOMINAL
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.750 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.060 INCHES NOMINAL
EXTERNAL ACTUATOR LINKAGE ARRANGEMENT	ONE, TWO, THREE, FOUR, FIVE, AND SIX LINKED
FREQUENCY IN HERTZ	400.0 ALL LOCATIONS
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	CORROSION RESISTANT AND MOISTURE RESISTANT
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
MANUAL ACTUATOR TYPE AND QUANTITY	6 TOGGLE
MATERIAL	PLASTIC CASE
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	10.0 AMPERES AC AND 50.0 AMPERES DC ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1500.0 AC AND 2000.0 DC ALL LOCATIONS
MOUNTING FACILITY TYPE AND QUANTITY	12 THREADED HOLE(S)
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.656 INCHES MAXIMUM
NOMINAL THREAD SIZE	0.138 INCHES
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	115.0 AC AND 28.0 DC ALL LOCATIONS
POLE QUANTITY	6
RESET METHOD	MANUAL
TERMINAL TYPE AND QUANTITY	12 THREADED STUD
TEST DATA DOCUMENT	13499-260-1015 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.150 MINIMUM AT 200 PCT AND 19.000 MAXIMUM AT 200 PCT ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS
TRIP RELEASE METHOD	MAGNETIC ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	125.0 ALL LOCATIONS

Click here to Register for Free 30-day Trial