|
|
|
National Stock Number:
5915-01-088-5469
Federal Supply Class:
5915
National Item Identification Number:
010885469
Description:
CAPACITOR-RESISTOR
Detail:
AN ITEM CONSISTING OF ONE OR MORE CAPACITORS AND ONE OR MORE RESISTORS MOLDED TOGETHER, HOUSED TOGETHER IN A COMMON CASE, OR MOUNTED ON A COMMON BOARD. THE INDIVIDUAL CAPACITORS AND RESISTORS ARE NOT SEPARABLE AND THE OVERALL ITEM USUALLY HAS VARIOUS DESIGN APPLICATIONS; HENCE, CANNOT BE CONSIDERED A SUBASSEMBLY. DO NOT USE IF MORE APPLICABLE ITEM NAMES, SUCH AS FILTER (AS MODIFIED), OR NETWORK (AS MODIFIED), EXIST.
|
Manufacturer Information:
| 2805052P1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| SCHEMATIC DIAGRAM DESIGNATOR | 1 CAPACITOR, 1 RESISTOR | | CAPACITANCE VALUE PER FUNCTION | 0.22 MICROFARADS CAPACITOR C1 | | ELECTRICAL RESISTANCE PER FUNCTION | 10.0 OHMS RESISTOR R1 | | ASSEMBLY FORM | MOLDED TOGETHER | | TERMINAL TYPE AND QUANTITY | 2 SCREW | | MOUNTING METHOD | UNTHREADED HOLE | | OVERALL LENGTH | 1.467 INCHES MINIMUM AND | | 1.507 INCHES MAXIMUM | | CAPACITANCE TOLERANCE PER FUNCTION IN PERCENT | -10.0 TO 10.0 CAPACITOR C1 | | DC VOLTAGE RATING PER FUNCTION IN VOLTS | 2.0 CAPACITOR C1 | | 2.0 RESISTOR R1 | | RESISTANCE TOLERANCE PER FUNCTION IN PERCENT | -5.0 TO 5.0 RESISTOR R1 | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.153 INCHES MINIMUM AND | | 0.161 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.125 INCHES NOMINAL | | OVERALL WIDTH | 0.360 INCHES MINIMUM AND | | 0.500 INCHES MAXIMUM | | OVERALL HEIGHT | 1.130 INCHES MINIMUM AND | | 1.180 INCHES MAXIMUM |
|
|