| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SQUARE HOLE |
| BODY DIAMETER | 0.260 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| BODY HEIGHT | 0.085 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| BODY STYLE | ROTARY |
| CAPACITANCE RANGE IN PICOFARADS | +1.0 TO 4.5 SINGLE SECTION |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO HEIGHT | 0.220 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| INCLOSURE TYPE | ENCASED |
| INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 10000.0 MEGOHMS |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 TERMINAL |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| NONDERATED VOLTAGE RATING AND TYPE | 250.0 DC CONTINUOUS SINGLE SECTION |
| PRECIOUS MATERIAL | GOLD AND SILVER |
| PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD AND ROTOR SURFACES AND ELECTRODES SILVER |
| QUALITY FACTOR AT 25 DEG CELSIUS | 1000.0 |
| TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 50.0 SINGLE SECTION |
| TERMINAL LENGTH | 0.135 INCHES MINIMUM AND 0.165 INCHES MAXIMUM |
| TERMINAL LOCATION | CIRCUMFERENCE 180 DEGREES APART ON END OPPOSITE ADJUSTMENT CONTROL PERPENDICULAR |
| TERMINAL THICKNESS | 0.004 INCHES MINIMUM AND 0.006 INCHES MAXIMUM |
| TERMINAL TYPE AND QUANTITY | 2 PRINTED CIRCUIT |
| TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -150.0 TO 150.0 SINGLE SECTION |