5910-01-234-7854, CAPACITOR,FIXED,METALLIZED,PAPER

5910-01-234-7853 CAPACITOR,FIXED,ELECTROLYTIC

5910-01-234-7855 CAPACITOR,FIXED,METALLIZED,PAPER

National Stock Number:
5910-01-234-7854

Federal Supply Class:
5910

National Item Identification Number:
012347854

Description:
CAPACITOR,FIXED,METALLIZED,PAPER

Detail:
A capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. It may be a single unit or consist of two or more units which cannot be separated.

Manufacturer Information:

09007	037Z3	DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS)
09007-007F	50558	ELECTRONIC CONCEPTS, INC.
CFR12RRB103FM	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CFR12RRB103FP	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-55514/8	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

BODY HEIGHT	0.090 INCHES NOMINAL
BODY LENGTH	0.190 INCHES NOMINAL
BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
BODY WIDTH	0.200 INCHES NOMINAL
CAPACITANCE VALUE PER SECTION	0.010 MICROFARADS SINGLE SECTION
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	0.200 INCHES NOMINAL
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT	0.300
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP	70000.0 MEGOHMS
INSULATION RESISTANCE AT REFERENCE TEMP	500000.0 MEGOHMS
MATERIAL	PLASTIC CASE
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	100.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM
RELIABILITY INDICATOR	ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL DIAMETER	0.025 INCHES NOMINAL
TERMINAL LENGTH	1.250 INCHES MINIMUM
TERMINAL TYPE AND QUANTITY	2 UNINSULATED WIRE LEAD
TERMINAL SURFACE TREATMENT	SOLDER
TOLERANCE RANGE PER SECTION	-1.00 TO 1.00 PERCENT SINGLE SECTION

Click here to Register for Free 30-day Trial