5905-01-315-1413 RESISTOR,FIXED,WIRE WOUND,INDUCT Index 5910-01-315-1415 CAPACITOR,FIXED,PLASTIC DIELECTR

National Stock Number:
5905-01-315-1414

Federal Supply Class:
5905

National Item Identification Number:
013151414

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
20SF8322-1025413ES BETA, LLC
6574S-642-10332997BOURNS INC
6574S-642-1033Z867BOURNS, INC.
6574S-642-10357921BOURNS INC PRECISIONS/CONTROLS DIV


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION350.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BEARING TYPEBALL SHAFT
BODY DIAMETER1.990 INCHES MINIMUM AND 2.005 INCHES MAXIMUM
BODY LENGTH0.569 INCHES MINIMUM AND 0.631 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FRAGILITY FACTORMODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25 TO 0.25 SINGLE SECTION
LATERAL RUNOUT0.003 INCHES
MAXIMUM RUNNING TORQUE0.75 INCH-OUNCES
MAXIMUM STARTING TORQUE0.75 INCH-OUNCES
MECHANICAL BACKLASH IN DEG ANGULAR ROTATION0.1
MOUNTING LIP DEPTH0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM
MOUNTING LIP DIAMETER1.9900 INCHES MINIMUM AND 2.0050 INCHES MAXIMUM
MOUNTING METHODCLAMP RING(S)
SHAFT RADIAL PLAY0.003 INCHES
SHAFT LENGTH0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
SHAFT RUNOUT0.001 INCHES
SHAFT STYLEROUND
PILOT DIAMETER1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM
PILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
PILOT DIAMETER RUNOUT0.001 INCHES
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG350.0 NOMINAL
SECTION QUANTITY1
SHAFT END PLAY0.003 INCHES
SHAFT DIAMETER0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM
UNDERCUT DIAMETER1.990 INCHES MINIMUM AND 2.005 INCHES MAXIMUM
UNDERCUT WIDTH0.0800 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-500.0 TO 500.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY3 TURRET


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us