|
|
|
National Stock Number:
5905-01-254-0804
Federal Supply Class:
5905
National Item Identification Number:
012540804
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 3232628-2 | 59364 | HONEYWELL INTERNATIONAL INC. | | 3232628-2 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | BODY DIAMETER | 1.080 INCHES MAXIMUM | | BODY LENGTH | 0.510 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 SINGLE SECTION | | PILOT DIAMETER | 0.9930 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM | | PILOT LENGTH | 0.0500 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | PROPRIETARY CHARACTERISTICS | PACS | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.05 | | MOUNTING LIP DEPTH | 0.0500 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM | | MOUNTING LIP DIAMETER | 1.0400 INCHES MINIMUM AND 1.0800 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP RING | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | BALL | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM | | SHAFT LENGTH | 0.260 INCHES MINIMUM AND 0.320 INCHES MAXIMUM | | SHAFT STYLE | ROUND | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD | | UNDERCUT DIAMETER | 0.915 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0500 INCHES MINIMUM |
|
|