|
|
|
National Stock Number:
5905-01-246-3489
Federal Supply Class:
5905
National Item Identification Number:
012463489
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| G310151-1 | 0EBU2 | VAMISTOR/WESTON DIV OF VAMISTOR CORP OF TENNESSEE INC | | G310151-1 | 24930 | L3HARRIS TECHNOLOGIES, INC | | G310151-1 | 32997 | BOURNS INC | | G310151-1 | 94271 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BEARING TYPE | SLEEVE SHAFT | | BODY HEIGHT | 0.590 INCHES NOMINAL | | BODY LENGTH | 0.550 INCHES NOMINAL | | BODY STYLE | RECTANGULAR W/BUSHING/SLOT MOUNTED | | BODY WIDTH | 0.300 INCHES NOMINAL | | CUBIC MEASURE | 0.141 CUBIC INCHES | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7200.0 MINIMUM AND 15120.0 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL | | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.073 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING AND UNTHREADED HOLE(S) | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.100 | | RELIABILITY INDICATOR | ESTABLISHED | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7200.0 MINIMUM AND 15120.0 MAXIMUM | | SCREW THREAD DIAMETER | 0.190 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.096 INCHES NOMINAL | | SHAFT LENGTH | 0.250 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 WIRE LEAD | | TEST DATA DOCUMENT | 24930-G310151 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|