|
|
|
National Stock Number:
5905-01-245-3372
Federal Supply Class:
5905
National Item Identification Number:
012453372
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 10127775 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | DFP16-10-S19 | 91637 | VISHAY DALE ELECTRONICS, LLC | | H950052-009B | 82577 | RAYTHEON COMPANY |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 330.000 OHMS | | ELECTRICAL RESISTANCE | 43.000 OHMS | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.065 INCHES MAXIMUM | | BODY LENGTH | 0.265 INCHES MAXIMUM | | BODY WIDTH | 0.365 INCHES NOMINAL | | CUBIC MEASURE | 0.006 CUBIC INCHES | | IDENTICAL VALUE RESISTOR QUANTITY | 7 HIGHEST RESISTANCE VALUE | | IDENTICAL VALUE RESISTOR QUANTITY | 7 LOWEST RESISTANCE VALUE | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.650 TOTAL NETWORK | | PROPRIETARY CHARACTERISTICS | PACS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -2.000/+2.000 | | SCHEMATIC DIAGRAM DESIGNATOR | SERIES NETWORK | | STYLE DESIGNATOR | FLAT PACK | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0/+100.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0/+125.0 | | TERMINAL LENGTH | 0.250 INCHES MINIMUM | | TERMINAL QUANTITY | 16 | | TERMINAL TYPE | PIN | | TERMINAL WIDTH | 0.019 INCHES MAXIMUM | | TEST DATA DOCUMENT | 82577-H950052 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|