|
|
|
National Stock Number:
5905-01-244-9424
Federal Supply Class:
5905
National Item Identification Number:
012449424
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 10127771 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 8998AJ-05-1000-G | 57027 | INTERNATIONAL RESISTIVE COMPANY OF TEXAS, LLC | | H950052-007B | 3B150 | RAYTHEON COMPANY | | H950052-007B | 54X10 | RAYTHEON COMPANY | | H950052-007B | 82577 | RAYTHEON COMPANY | | DFP16-12-101G-S21 | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.065 INCHES MAXIMUM | | BODY LENGTH | 0.265 INCHES MAXIMUM | | BODY WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | CUBIC MEASURE | 0.002 CUBIC INCHES | | ELECTRICAL RESISTANCE | 100.000 OHMS EACH RESISTOR | | IDENTICAL VALUE RESISTOR QUANTITY | 15 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR | C | | POWER DISSIPATION RATING IN WATTS | 0.650 TOTAL NETWORK | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -2.000 TO 2.000 EACH RESISTOR | | SCHEMATIC DIAGRAM DESIGNATOR | LADDER NETWORK | | STYLE DESIGNATOR | FLAT PACK | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -100.0 TO 100.0 | | TERMINAL LENGTH | 0.250 INCHES MINIMUM | | TERMINAL QUANTITY | 16 | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM | | TEST DATA DOCUMENT | 82577-H950052 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|