|
|
|
National Stock Number:
5905-01-244-6664
Federal Supply Class:
5905
National Item Identification Number:
012446664
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 12333927 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | JS1P040P500UA | 01121 | ROCKWELL AUTOMATION, INC. | | JS1P040P500UA | 12697 | CLAROSTAT SENSORS AND CONTROLS |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | STOPS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION | | BODY DIAMETER | 1.156 INCHES MAXIMUM | | BODY LENGTH | 0.906 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | CUBIC MEASURE | 0.950 CUBIC INCHES | | DEVICE DESIGN TYPE | NONTURN AT 9 OCLOCK | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 292.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 50.000 OHMS SINGLE SECTION | | FEATURES PROVIDED | PANEL SEAL AND SWITCH | | FRAGILITY FACTOR | MODERATELY RUGGED | | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES | | MAXIMUM STOP TORQUE | 192.00 INCH-OUNCES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.5 | | MOUNTING BUSHING LENGTH | 0.281 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE RADIUS | 0.537 INCHES MAXIMUM | | OPERATING POSITION | START OF ROTATION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.25 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 333.0 NOMINAL | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT LENGTH | 0.630 INCHES NOMINAL | | SHAFT BEARING TYPE | SLEEVE | | SHAFT DIAMETER | 0.250 INCHES MAXIMUM | | SHAFT STYLE | ROUND | | SWITCH TYPE | ROTARY | | SWITCH VOLTAGE RATING IN VOLTS | 125.0 | | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED | | SWITCH CURRENT TYPE AND RATING IN AMPS | 2.000 AC | | TERMINAL LOCATION | REAR-BOTTOM | | TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 18876-12333927 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|