|
|
|
National Stock Number:
5905-01-243-3388
Federal Supply Class:
5905
National Item Identification Number:
012433388
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 0680-0031 | 21845 | SOLITRON DEVICES, INC. | | 0680-0031 | 95077 | SV MICROWAVE, INC. | | 8500230 | 07187 | HONEYWELL INTERNATIONAL INC. | | 312488 | 18612 | VISHAY INTERTECHNOLOGY, INC. |
|
Techincal Specification:
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 | | BODY HEIGHT | 0.200 INCHES MAXIMUM | | BODY LENGTH | 0.830 INCHES NOMINAL | | BODY WIDTH | 0.270 INCHES NOMINAL | | ELECTRICAL RESISTANCE | 10.000 KILOHMS EACH RESISTOR | | IDENTICAL VALUE RESISTOR QUANTITY | 8 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.800 TOTAL NETWORK | | RESISTANCE TOLERANCE IN PERCENT | -0.010 TO 0.010 EACH RESISTOR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | ISOLATED ARRAY | | STYLE DESIGNATOR | DUAL INLINE | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 150.0 | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 | | TERMINAL LENGTH | 0.135 INCHES NOMINAL | | TERMINAL QUANTITY | 16 | | TERMINAL TYPE | TAB, SOLDER LUG | | TERMINAL WIDTH | 0.015 INCHES MINIMUM AND 0.022 INCHES MAXIMUM | | TEST DATA DOCUMENT | 07187-8500230 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|