|
|
|
National Stock Number:
5905-01-237-3440
Federal Supply Class:
5905
National Item Identification Number:
012373440
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 5401R100L.5 | 73138 | BI TECHNOLOGIES CORPORATION | | 5401R100L0.5 | 73138 | BI TECHNOLOGIES CORPORATION | | 747071-01 | 35351 | GE AVIATION SYSTEMS LLC |
|
Techincal Specification:
| SECTION QUANTITY | 1 | | ELECTRICAL RESISTANCE PER SECTION | 100.000 OHMS SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50 TO 0.50 SINGLE SECTION | | SHAFT RUNOUT | 0.005 INCHES | | LATERAL RUNOUT | 0.0025 INCHES | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | SHAFT RADIAL PLAY | 0.0015 INCHES | | SHAFT BEARING TYPE | SLEEVE | | SHAFT END PLAY | 0.00500 INCHES | | MAXIMUM STARTING TORQUE | 1.60 INCH-OUNCES | | MAXIMUM RUNNING TORQUE | 0.80 INCH-OUNCES | | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | 0.0 TO 130.0 SINGLE SECTION | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | BODY DIAMETER | 1.437 INCHES NOMINAL | | BODY LENGTH | 0.954 INCHES NOMINAL | | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND | | SHAFT DIAMETER | 0.2497 INCHES MAXIMUM | | SHAFT LENGTH | 0.875 INCHES NOMINAL | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 354.0 NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | SCREW THREAD SERIES DESIGNATOR | UN | | SCREW THREAD DIAMETER | 0.500 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | TERMINAL TYPE AND QUANTITY | 3 TURRET | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | RELIABILITY INDICATOR | NOT ESTABLISHED | | TEST DATA DOCUMENT | 35351-747071 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | OVERALL LENGTH | 1.829 INCHES NOMINAL | | OVERALL DIAMETER | 1.437 INCHES NOMINAL | | CUBIC MEASURE | 2.966 CUBIC INCHES | | FRAGILITY FACTOR | MODERATELY RUGGED |
|
|