5905-00-759-7300 RESISTOR,FIXED,WIREWOUND,NONIND Index 5905-00-759-7305 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-759-7303

Federal Supply Class:
5905

National Item Identification Number:
007597303

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
20049-310112GENERAL DYNAMICS MOTION CONTROL LLC
246966010001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
781210112GENERAL DYNAMICS MOTION CONTROL LLC


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION5.0 OHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
BEARING TYPEBALL SHAFT
BODY DIAMETER0.850 INCHES MINIMUM AND 0.890 INCHES MAXIMUM
BODY LENGTH1800.000 INCHES NOMINAL
BODY STYLECYLINDRICAL SERVO MOUNTED
FEATURES PROVIDEDNONMETALLIC SHAFT
FRAGILITY FACTORMODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.50 TO 0.50 SINGLE SECTION
OVERALL DIAMETER0.995 INCHES NOMINAL
OVERALL LENGTH2.362 INCHES NOMINAL
MAXIMUM STARTING TORQUE1.50 INCH-OUNCES
MAXIMUM STOP TORQUE80.00 INCH-OUNCES
MOUNTING LIP DEPTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
MOUNTING LIP DIAMETER0.8500 INCHES MINIMUM AND 0.8900 INCHES MAXIMUM
MOUNTING METHODCLAMP RING(S)
PILOT DIAMETER0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
PILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG3700.0 NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
SHAFT STYLEROUND
SHAFT LENGTH0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-40.0 TO 40.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TERMINAL TYPE AND QUANTITY3 SOLDER STUD
UNDERCUT DIAMETER0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us