5905-00-232-1829 RESISTOR,VARIABLE,WIRE WOUND,PRE Index 5905-00-232-1831 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-232-1830

Federal Supply Class:
5905

National Item Identification Number:
002321830

Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.


Manufacturer Information:
1960932-119315HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
1960932-155972HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
957904454SENSOR SYSTEMS, L.L.C.


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS 1ST SECTION
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS 3RD SECTION
ELECTRICAL RESISTANCE PER SECTION10.0 KILOHMS 5TH SECTION
ELECTRICAL RESISTANCE PER SECTION10.0 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS
ELECTRICAL RESISTANCE PER SECTION5.0 PERCENT, RATED AMPERES C AND BETTER V.G. STEPPING
ACTUATOR TYPESINGLE SHAFT
BODY DIAMETER1.094 INCHES MAXIMUM
BODY LENGTH2.093 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FUNCTION CHARACTERISTIC PER SECTIONALL SECTIONS TABLE
FUNCTION CONFORMITY PER SECTIONALL SECTIONS ABSOLUTE CONFORMITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.20/+0.20 2ND SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.20 TO 0.20 3RD SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.20 TO 0.20 5TH SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.25/+0.25 1ST SECTION
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.50/+0.50 4TH SECTION
PILOT DIAMETER0.9683 INCHES MINIMUM AND 0.9688 INCHES MAXIMUM
PILOT LENGTH0.0620 INCHES NOMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR ALL SECTIONS
PROPRIETARY CHARACTERISTICSPACS
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL
MOUNTING LIP DIAMETER1.0620 INCHES NOMINAL
MOUNTING METHODCLAMP RING
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 4TH SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0/+10.0 5TH SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0/+5.0 1ST SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0 TO 5.0 2ND SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-5.0/+5.0 3RD SECTION
SECTION QUANTITY5
SHAFT DIAMETER0.1244 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM
SHAFT LENGTH0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY15 TURRET
TEST DATA DOCUMENT55972-1960932 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
UNDERCUT DIAMETER0.975 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us