|
|
|
National Stock Number:
5905-00-156-7085
Federal Supply Class:
5905
National Item Identification Number:
001567085
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 4638 | 04454 | SENSOR SYSTEMS, L.L.C. | | 502-5019 | 02111 | VISHAY SPRAGUE INC | | 836553 | 98571 | TELEDYNE CONTROLS, LLC |
|
Techincal Specification:
| SECTION QUANTITY | 2 | | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS 1ST SECTION | | 2.0 KILOHMS 2ND SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0 TO 1.0 1ST SECTION | | -2.0 TO 2.0 2ND SECTION | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT BEARING TYPE | BEARING | | SHAFT END PLAY | 0.005 INCHES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.1 FREE AIR ALL SECTIONS | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND | | 0.6250 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM | | BODY DIAMETER | 0.875 INCHES NOMINAL | | BODY LENGTH | 3.031 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 0.8750 INCHES NOMINAL | | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL | | ACTUATOR TYPE | SINGLE SHAFT | | SHAFT STYLE | ROUND, SLOTTED | | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND | | 0.1248 INCHES MAXIMUM | | SHAFT LENGTH | 0.375 INCHES MINIMUM AND | | 0.438 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP RING | | RELIABILITY INDICATOR | NOT ESTABLISHED | | OVERALL LENGTH | 3.522 INCHES MAXIMUM | | OVERALL DIAMETER | 0.875 INCHES NOMINAL |
|
|