|
|
|
National Stock Number:
5905-00-134-0426
Federal Supply Class:
5905
National Item Identification Number:
001340426
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 134FTS107-4 | 08815 | HONEYWELL INTERNATIONAL INC | | 22027-4 | 04454 | SENSOR SYSTEMS, L.L.C. | | 412197-14 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 55.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 ALL SECTIONS | | BODY DIAMETER | 1.767 INCHES MAXIMUM | | BODY LENGTH | 0.977 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW-CW | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 165.0 MINIMUM AND 175.0 MAXIMUM | | ELECTRICAL RESISTANCE PER SECTION | 8.5 KILOHMS 1ST SECTION AND 4.25 KILOHMS 2ND SECTION | | FEATURES PROVIDED | NONMETALLIC SHAFT | | FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION | | PILOT DIAMETER | 1.5620 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR ALL SECTIONS | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.7670 INCHES MAXIMUM | | MOUNTING METHOD | CLAMP RING(S) | | OVERALL DIAMETER | 2.120 INCHES MAXIMUM | | OVERALL LENGTH | 2.230 INCHES MAXIMUM | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 2 | | SHAFT DIAMETER | 0.125 INCHES NOMINAL | | SHAFT LENGTH | 0.562 INCHES NOMINAL | | SHAFT STYLE | ROUND | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 4250.0 1ST SECTION | | TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 OHMS 1ST SECTION | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -300.0 TO 300.0 ALL SECTIONS | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 7 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 80020-41297 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL | | UNDERCUT DIAMETER | 1.750 INCHES MAXIMUM |
|
|