5365-01-606-1396, SPACER,PLATE

National Stock Number:
5365-01-606-1396

Federal Supply Class:
5365

National Item Identification Number:
016061396

Description:
SPACER,PLATE

Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Manufacturer Information:

200532117-1	98747	OGDEN AIR LOGISTICS CENTER
D10B-0.6-4-4	06351	MICROWAVE ENGINEERING CORPORATION

Techincal Specification:

APERTURE LENGTH	1.580 INCHES MINIMUM AND 1.600 INCHES MAXIMUM
APERTURE WIDTH	0.785 INCHES MINIMUM AND 0.805 INCHES MAXIMUM
BOLT HOLE QUANTITY	8
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH	1.00 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	0.75 INCHES NOMINAL
HOLE DIAMETER	0.257 INCHES MINIMUM AND 0.262 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	ASTMB36 ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	COPPER ALLOY
PART NAME ASSIGNED BY CONTROLLING AGENCY	SPACER
PROPRIETARY CHARACTERISTICS	PACS
OUTSIDE CORNER RADIUS	0.31 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH	0.335 INCHES MINIMUM AND 0.355 INCHES MAXIMUM
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG LENGTH	0.8225 INCHES NOMINAL
OUTSIDE EDGE TO INSIDE EDGE SMALLEST DISTANCE ALONG WIDTH	0.80 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH	0.312 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
OVERALL LENGTH	3.16 INCHES MINIMUM AND 3.22 INCHES MAXIMUM
OVERALL THICKNESS	0.66 INCHES MINIMUM AND 0.70 INCHES MAXIMUM
OVERALL WIDTH	2.41 INCHES MINIMUM AND 2.47 INCHES MAXIMUM
SPECIAL FEATURES	OPERATIONAL ALTITUDE RANGE 300 FT BELOW SEA LEVEL TO 8000 FT ABOVE IT. STORAGE ALTITUDE RANGE 300 FT BELOW SEA LEVEL TO 40000 FT ABOVE IT. OPERATING PRESSURE IS 20PSIG TO 40PSIG. WITHSTANDING VIBRATIONS PER FIGURE 514.5C-1 OF MIL-STD-810
STORAGE TEMP RANGE	-40.0 TO 68.0 DEG CELSIUS
STYLE DESIGNATOR	NON-CIRCULAR W/BOLT HOLES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-PRF-85285, TYPE II, COLOR NO. 17925 PER FED-STD-595 MIL SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENT	PLASTIC POLYURETHANE
TEMP RATING	-40.0 DEG CELSIUS AND 52.0 DEG CELSIUS

Click here to Register for Free 30-day Trial