5365-01-582-5957, BUSHING,SLEEVE

National Stock Number:
5365-01-582-5957

Federal Supply Class:
5365

National Item Identification Number:
015825957

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

Manufacturer Information:

AS14238	0U583	SAE INTERNATIONAL
AS14238	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
MS14238C16P038	0U583	SAE INTERNATIONAL
MS14238C16P038	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
MS14238C16P038	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FLANGE WIDTH	0.0940 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM
OVERALL LENGTH	0.4740 INCHES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCY	BUSHING, SLEEVE FLANGED, PRESS FIT, REAM TYPE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 630 OVERALL
SPECIAL FEATURES	SURFACE FINISH IS 125 RMS
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TYPE II CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE LEFT END SURFACE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TYPE II CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TYPE II CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE
SURFACE TREATMENT	CADMIUM LEFT END SURFACE
SURFACE TREATMENT	CADMIUM OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT	CADMIUM RIGHT END SURFACE
SURFACE TREATMENT	PASSIVATE OVERALL
BODY INSIDE DIAMETER	0.9820 INCHES MINIMUM AND 0.9920 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	1.1891 INCHES MINIMUM AND 1.1901 INCHES MAXIMUM
CORNER SHAPE	CHAMFERED INSIDE RIGHT CORNER
CORNER SHAPE	CHAMFERED OUTSIDE RIGHT CORNER
CORNER SHAPE	ROUND LEFT FLANGE BODY CORNER
CORNER SHAPE	SQUARE INSIDE LEFT CORNER
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
CORNER SHAPE	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
FLANGE OUTSIDE DIAMETER	1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM

Click here to Register for Free 30-day Trial