|
|
|
National Stock Number:
5365-01-581-3385
Federal Supply Class:
5365
National Item Identification Number:
015813385
Description:
BUSHING,SLEEVE
Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
|
Manufacturer Information:
|
Techincal Specification:
| BODY INSIDE DIAMETER | 1.0190 INCHES MINIMUM AND 1.0240 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 1.0410 INCHES MINIMUM AND 1.0460 INCHES MAXIMUM | | FLANGE OUTSIDE DIAMETER | 1.2500 INCHES MINIMUM AND 1.3760 INCHES MAXIMUM | | FLANGE WIDTH | 0.1570 INCHES NOMINAL | | FUNCTIONAL DESCRIPTION | SLEEVE USED TO SOLVE THE PROBLEM OF WORN SEAL COUNTERFACES AT SHAFT ENDS. THIS THIN-WALLED SLEEVE HAS A HIGH QUALITY FINISH TO PROVIE OPTIMA; COUNTERFACE FOR A RADIAL SHAFT SEAL. SLEEVE IS SIMPLY PUSHED IN POSITION OVER THE WORN AREA PROVIDING A SEALING SURFACE THAT IS AS GOOD AS A NEW SHAFT. FLANGE ON SLEEVE IS REMOVABLE TO SIMLIFY INSTALLATION. | | OVERALL LENGTH | 0.4410 INCHES MINIMUM AND 0.5030 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SKF SPEEDI SLEEVE (WEAR SLEEVE) | | STYLE DESIGNATOR | SPLIT, EXTERNAL FLANGE ONE END |
|
|