|
|
|
National Stock Number:
5365-01-241-7749
Federal Supply Class:
5365
National Item Identification Number:
012417749
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 933A386P9 | 07482 | GENERAL ELECTRIC COMPANY | | 933A386P9 | 0AMR1 | AEROSPACE INDUSTRIES LLC | | 933A38P9 | 0AMR1 | AEROSPACE INDUSTRIES LLC |
|
Techincal Specification:
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | BOLT HOLE QUANTITY | 2 | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.600 INCHES NOMINAL | | END RADIUS | 0.350 INCHES MINIMUM AND 0.450 INCHES MAXIMUM | | HOLE DIAMETER | 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 321 | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM | | OVERALL LENGTH | 4.200 INCHES MINIMUM AND 4.240 INCHES MAXIMUM | | OVERALL WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM | | STYLE DESIGNATOR | NON-CIRCULAR W/ROUNDED ENDS |
|
|