5365-01-236-0516 SHIM Index 5365-01-236-0518 SHIM

National Stock Number:
5365-01-236-0517

Federal Supply Class:
5365

National Item Identification Number:
012360517

Description:
SHIM

Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.


Manufacturer Information:
7614-0070-0317472EATON AEROSPACE LLC


Techincal Specification:
BOLT HOLE QUANTITY2
CONSTRUCTIONONE-PIECE
HOLE DIAMETER0.094 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A666,FULL HARD ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 302
PROPRIETARY CHARACTERISTICSPACS
OVERALL LENGTH1.778 INCHES MINIMUM AND 1.788 INCHES MAXIMUM
OVERALL WIDTH0.660 INCHES NOMINAL
SPECIAL FEATURES2 SLOTS ALONG OPPOSITE SIDES OF LENGTH,ONE SLOT 0.155 IN. W,0.310 IN. DP,ONE SLOT 0.330 IN. W,0.285 IN. DP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SURFACE TREATMENTCADMIUM AND PHOSPHATE


Click here to Register for Free 30-day Trial