|
|
|
National Stock Number:
5365-01-232-7995
Federal Supply Class:
5365
National Item Identification Number:
012327995
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 2046578-4 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| APERTURE DIAMETER | 3.760 INCHES MINIMUM AND 3.780 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059,1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 301 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 4.420 INCHES MINIMUM AND 4.440 INCHES MAXIMUM | | SLOT QUANTITY | 6 | | SLOT RADIUS | 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | SLOT WIDTH | 0.260 INCHES MINIMUM AND 0.280 INCHES MAXIMUM | | SLOT DEPTH | 0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM | | SPECIAL FEATURES | SPLIT 0.480-0.520 IN. W GAP | | STYLE DESIGNATOR | CIRCULAR W/SLOTS W/O BOLT HOLES |
|
|