|
|
|
National Stock Number:
5340-01-308-9181
Federal Supply Class:
5340
National Item Identification Number:
013089181
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| 6098973 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| HINGE MOUNTING TYPE | FULL SURFACE | | KNUCKLE QUANTITY | 16 | | KNUCKLE TYPE | FRICTION | | OVERALL LENGTH | 30.380 INCHES NOMINAL | | MATERIAL THICKNESS | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 5052 BODY | | MATERIAL | ALUMINUM ALLOY 5052 PIN | | MOUNTING HOLE DIAMETER | 0.218 INCHES NOMINAL | | MOUNTING HOLE QUANTITY | 9 | | PERFORMANCE TYPE | NOT RATED | | PIN DIAMETER | 0.373 INCHES MINIMUM AND 0.377 INCHES MAXIMUM | | PIN CENTER TO BODY EDGE DISTANCE | 1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM | | PIN REMOVABILITY | REMOVABLE | | REVERSIBLE FEATURE | INCLUDED | | RISING PIN | NOT INCLUDED | | SPECIAL FEATURES | MTG HOLES CSK 100 DEG TO 0.385 DIA; FIVE MTG HOLES EQUISPACED ON CENTERLINE LOCATED 1.658 IN. FROM PIN CENTERLINE; FOUR MTG HOLES AND TWO MTG SLOTS EQUISPACED ON CENTERLINE LOCATED 1.408 IN. FROM PIN CENTERLINE W/MTG SLOTS AT BOTH ENDS AND SPACED 0.815 IN. FROM END; MTG SLOTS 0.436 IN. LG BY 0.218 IN. W; SLOTS ROUNDED BOTH ENDS 0.109 IN. RADIUS W/LOWER RADIUS ON CENTERLINE AND SLOT EXTENDING TOWARDS HINGE CENTER PIN; COLOR BLACK; MAKE FROM MS35830 | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE 3, CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL |
|
|