|
|
|
National Stock Number:
5340-01-306-5872
Federal Supply Class:
5340
National Item Identification Number:
013065872
Description:
HINGE,BUTT
Detail:
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
|
Manufacturer Information:
| MS20001 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS20001P16-4300 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY WIDTH | 42.980 INCHES MINIMUM AND 43.020 INCHES MAXIMUM | | HINGE MOUNTING TYPE | FULL SURFACE | | KNUCKLE TYPE | FRICTION | | KNUCKLE QUANTITY | 86 | | MATERIAL THICKNESS | 0.196 INCHES MINIMUM AND 0.210 INCHES MAXIMUM | | MATERIAL | ALUMINUM ALLOY 2024 BODY | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 PIN | | PERFORMANCE TYPE | NOT RATED | | PIN CENTER TO BODY EDGE DISTANCE | 1.969 INCHES NOMINAL | | PIN REMOVABILITY | REMOVABLE | | REVERSIBLE FEATURE | INCLUDED | | RISING PIN | NOT INCLUDED | | SPECIAL FEATURES | ONLY COMPLETE HINGES WILL BE STOCKED; ENDS OF ALL HINGES WILL BE FINISHED; HINGE PIN,MS20253P-4-4300 | | STYLE DESIGNATOR | BUTT | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE PIN | | SURFACE TREATMENT | CADMIUM PIN | | SURFACE TREATMENT | ANODIZE BODY |
|
|